PEER-REVIEWED JOURNAL PUBLICATIONS

2017:
  1. S. Gupta, G. Fan, and K. J. Loh, 2017, "Noninvasive Monitoring of Epoxy Curing," IEEE Sensors Letters (2475-1472), IEEE, Early Access. DOI: 10.1009/LSENS.2017.2753581
  2. Y. Zhao, M. Schagerl, C. Viechtbauer, and K. J. Loh, 2017, "Characterizing the Conductivity and Enhancing the Piezoresistivity of Carbon Nanotube-Polymeric Thin Films for Use as Spatial Strain Sensors," Materials (1996-1944), MDPI, 10(724): 1-11. DOI: 10.3390/ma10070724
  3. S. Gupta and K. J. Loh, 2017, "Noncontact Electrical Permittivity Mapping and pH-Sensitive Thin Films for Osseointegrated Prosthesis and Infection Monitoring," IEEE Transactions on Medical Imaging (0278-0062), IEEE, Early Access. DOI: 10.1109/TMI.2017.2707390
  4. S. Gupta and K. J. Loh, 2017, "Non-Contact Tomographic Imaging and Nanocomposite Films for Monitoring Human-Prosthesis Interfaces," Procedia Engineering (1877-7058), Elsevier, 188: 110-118. DOI: 10.1016/j.proeng.2017.04.464
  5. L. Wang and K. J. Loh, 2017, "Wearable Carbon Nanotube-based Fabric Sensors for Monitoring Human Physiological Performance," Smart Materials and Structures (0964-1726), IOP, 26: 055018/1-11. DOI: 10.1088/1361-665X/aa6849
  6. B. Lee, K. J. Loh, and Y-S. Yang, 2017, "Carbon Nanotube Thin Film Strain Sensor Models Assembled using Nano- and Micro-Scale Imaging," Computational Mechanics (0178-7675), Springer, 1-11, OnlineFirst. DOI: 10.1007/s00466-017-1391-6
  7. B. Lee and K. J. Loh, 2017, "Carbon Nanotube Thin Film Strain Sensors: Comparison between Experimental Tests and Numerical Simulations," Nanotechnology (0957-4484), IOP, 28(15): 155502/1-14. DOI: 10.1088/1361-6528/aa6382
2016:
  1. F. Azhari and K. J. Loh, 2016, "Laboratory Validation of Buried Piezoelectric Scour Sensing Rods," Journal of Structural Control and Health Monitoring (1545-2263), Wiley. DOI: 10.1002/stc.1969
  2. F. Azhari and K. J. Loh, 2016, "Dissolved Oxygen Sensors for Scour Monitoring," IEEE Sensors (1530-437X), IEEE, 16(23): 8357-8358. DOI: 10.1109/JSEN.2016.2613123
  3. C-H. Loh, K. J. Loh, Y-S. Yang, W-Y. Hsiung, and Y-T. Huang, 2016, "Vibration-based System Identification and Damage Detection of Wind Turbine Blades," Journal of Structural Control and Health Monitoring (1545-2263), Wiley, Online. DOI: 10.1002/stc.1876
  4. W. Lestari, B. Pinto, V. La Saponara, J. Yasui, and K. J. Loh, 2016, "Sensing Uniaxial Tensile Damage in Fiber-Reinforced Polymer Composites using Electrical Resistance Tomography," Smart Materials and Structures (0964-1726), IOP, 25(8): 085016/1-8. DOI: 10.1068/0964-1726/25/8/085016
  5. L. Wang, S. Gupta, K. J. Loh, and H. S. Koo, 2016, "Distributed Pressure Sensing using Carbon Nanotube Fabrics," IEEE Sensors (1530-437X), IEEE, 16(12): 4663-4664. DOI: 10.1109/JSEN.2016.2553045
  6. J. G. Gonzalez, S. Gupta, and K. J. Loh, 2016, “Multifunctional Cement Composites Enhanced with Carbon Nanotube Thin Film Interfaces,” Proceedings of the IEEE (0018-0219), IEEE, 104(8): 1547-1560. DOI: 10.1109/JPROC.2015.2503299
  7. S. Gupta, J. G. Gonzalez, and K. J. Loh, 2016, "Self-Sensing Concrete Enabled by Nano-Engineered Cement Aggregate Interfaces," Structural Health Monitoring (1475-9217), Sage, 1-15. DOI: 10.1177/1475921716643867
  8. L. Wang, K. J. Loh, L. Brely, F. Bosia, and N. M. Pugno, 2016 “An Experimental and Numerical Study on the Mechanical Properties of Carbon Nanotube-Latex Thin Films,” Journal of the European Ceramics Society (0955-2219), Elsevier, 36(9): 2255-2262. DOI: 10.1016/j.jeurceramsoc.2015.12.052
2015:
  1. C-H. Loh, Y-T. Huang, W-Y. Hsiung, Y-S. Yang, and K. J. Loh, 2015, “Vibration-based Identification of Rotating Blades using Rodrigues’ Rotation Formula from a 3-D Measurement,” Wind & Structures (1226-6116), Techno-Press, 21(6): 677-691. DOI: 10.12989/was.2015.21.6.677
  2. L. Wang and K. J. Loh, 2015, “Spray-coated Carbon Nanotube-Latex Strain Sensors,” Science Letters Journal (2278-3393), Cognizure, 5(234): 1-10.
  3. B. Pinto, S. Kern, J. J. Ku-Herrera, J. Yasui, V. La Saponara, and K. J. Loh, 2015, “A Comparative Study of a Self-monitoring CNT Film and Carbon Fibers under Flexural Loading by Electrical Resistance Changes,” Journal of Physics: Conference Series (1742-6596), IOP, 628(012098): 1-7. DOI: 10.1088/1742-6596/628/1/012098
  4. K. J. Loh and J. Gonzalez, 2015, “Cementitious Composites Engineered with Embedded Carbon Nanotube Thin Films for Enhanced Sensing Performance,” Journal of Physics: Conference Series (1742-6596), IOP, 628(012042): 1-8. DOI: 10.1088/1742-6596/628/1/012042
  5. E. Rojas, A. Baltazar, and K. J. Loh, 2015, “Damage Detection using the Signal Entropy of an Ultrasonic Sensor Network,” Smart Materials and Structures (0964-1726), IOP, 24(7), 075008: 1-11. DOI: 10.1088/0964-1726/24/7/075008
  6. F. Azhari, P. Scheel, and K. J. Loh, 2015, “Monitoring Bridge Scour using Dissolved Oxygen Probes,” Structural Monitoring and Maintenance (2288-6605), Techno-Press, 2(2): 145-164. DOI: http://dx.doi.org/10.12989/smm.2015.2.2.145
  7. B. M. Lee and K. J. Loh, 2015, “A 2D Percolation-based Model for Characterizing the Piezoresistivity of Carbon Nanotube-based Films,” Journal of Materials Science (0022-2461), Springer, 50(7): 2973-2983. DOI: 10.1007/s10853-015-8862-y
  8. D. Ryu, F. N. Meyers, and K. J. Loh, 2015, “Inkjet-printed, Flexible, and Photoactive Thin Film Strain Sensors,” Journal of Intelligent Material Systems and Structures (1045-389X), Sage, 26(13): 1699-1710. DOI: 10.1177/1045389X14546653
2014:
  1. K. J. Loh, C. Tom, J. Benassini, and F. Bombardelli, 2014, “A Distributed Piezo-polymer Scour Net for Bridge Scour Hole Topography Monitoring,” Structural Monitoring and Maintenance (2288-6605), Techno-Press, 1(2): 183-195. DOI: 10.12989/smm.2014.1.2.183
  2. D. Ryu and K. J. Loh, 2014, “Multi-modal Sensing using Photoactive Thin Films,” Smart Materials and Structures (0964-1726), IOP, 23(8), 085011: 1-16. DOI: 10.1088/0964-1726/23/8/085011
2013:
  1. J. S. Dodds, F. N. Meyers, and K. J. Loh, 2013, “Piezoelectric Nanocomposite Sensors Assembled using Zinc Oxide Nanoparticles and Poly(vinylidene fluoride),” Smart Structures and Systems (1738-1584), Techno-Press, 12(1): 55-72. DOI: 10.12989/sss.2013.12.1.055
  2. D. Ryu and K. J. Loh, 2013, “Analyzing the Strain Sensing Response of Photoactive Thin Films using Absorption Spectroscopy,” Key Engineering Materials Journal (1013-9826), Trans Tech, 569-570: 695-701. DOI: 10.4028/www.scientific.net/KEM.569-570.695
  3. L. P. Mortensen, D. Ryu, Y. Zhao, and K. J. Loh, 2013, “Rapid Assembly of Multifunctional Thin Film Sensors for Wind Turbine Blade Monitoring,” Key Engineering Materials Journal (1013-9826), Trans Tech, 569-570: 515-522. DOI: 10.4028/www.scientific.net/KEM.569-570.515 (DAMAS Best Paper Award)
  4. B. R. Loyola, V. La Saponara, K. J. Loh, T. M. Briggs, G. O’Bryan, and J. L. Skinner, 2013, “Spatial Sensing using Electrical Impedance Tomography,” IEEE Sensors (1530-437X), IEEE, 13(6): 2357-2367. DOI: 10.1109/JSEN.2013.2253456
  5. B. R. Loyola, T. M. Briggs, L. Arronche, K. J. Loh, V. La Saponara, G. O’Bryan, and J. L. Skinner, 2013, “Detection of Spatially Distributed Damage in Fiber-Reinforced Polymer Composites,” Structural Health Monitoring (1475-9217), Sage, 12(3): 225-240. DOI: 10.1177/1475921713479642
  6. F. N. Meyers, K. J. Loh, J. S. Dodds, and A. Baltazar, 2013, “Active Sensing and Damage Detection using Piezoelectric Zinc Oxide-based Nanocomposites,” Nanotechnology (0957-4484), IOP, 24(185501): 1-10. DOI: 10.1088/0957-4484/24/18/185501
  7. B. R. Loyola, Y. Zhao, K. J. Loh, and V. La Saponara, 2013, “The Electrical Response of Carbon Nanotube-based Thin Films Subjected to Mechanical and Environmental Effects,” Smart Materials and Structures (0964-1726), IOP, 22(025010): 1-11. DOI: 10.1088/0964-1726/22/2/025010
2012:
  1. K. J. Loh and F. Azhari, 2012, “Recent Advances in Skin-inspired Sensors Enabled by Nanotechnology,” Journal of Materials (1047-4838), Springer, 64(7): 793-801. DOI: 10.1007/s11837-012-0358-5
  2. A. Vandenberg and K. J. Loh, 2012, “Evaluating the pH Sensitivity of Carbon Nanotube-Polyaniline Thin Films with Different Dopants,” Nano LIFE (1793-9844), World Scientific, 2(4): 1242001/1-12. DOI: 10.1142/S1793984412420019
  3. D. Ryu and K. J. Loh, 2012, “Strain Sensing using Photocurrent Generated by Photoactive P3HT-based Nanocomposites,” Smart Materials and Structures (0964-1726), IOP, 21(065017): 1-9. DOI: 10.1088/0964-1726/21/6/065017 (ASME ASMS Best Paper Award)
  4. J. S. Dodds, F. N. Meyers, and K. J. Loh, 2012, “Piezoelectric Characterization of PVDF-TrFE Thin Films Enhanced with ZnO Nanoparticles,” IEEE Sensors (1530-437X), IEEE, 12(6): 1889-1890. DOI: 10.1109/JSEN.2011.2182043
2011:
  1. D. Ryu, K. J. Loh, R. Ireland, M. Karimzada, F. Yaghmaie, and A. M. Gusman, 2011, “In Situ Reduction of Gold Nanoparticles in PDMS Matrices and Applications for Large Strain Sensing,” Smart Structures and Systems (1738-1584), Techno-Press, 8(5): 471-486.
  2. S. Pyo, K. J. Loh, T-C. Hou, E. Jarva, and J. P. Lynch, 2011, “A Wireless Impedance Analyzer for Automated Tomographic Mapping of a Nanoengineered Sensing Skin,” Smart Structures and Systems (1738-1584), Techno-Press, 8(1): 137-155.
  3. Y. Zhao, B. R. Loyola, and K. J. Loh, 2011, “Characterizing the Viscoelastic Properties of Layer-by-Layer Carbon Nanotube-Polyelectrolyte Thin Films,” Smart Materials and Structures (0964-1726), IOP, 20(7): 075020/1-11. DOI: 10.1088/0964-1726/20/7/075020
  4. K. J. Loh and D. Chang, 2011, “Zinc Oxide Nanoparticle-Polymeric Thin Films for Dynamic Strain Sensing,” Journal of Materials Science (0022-2461), Springer, 46(1): 228-237. DOI: 10.1007/s10853-010-4940-3 
2010:
  1. B. R. Loyola, V. La Saponara, and K. J. Loh, 2010, “In Situ Strain Monitoring of Fiber-Reinforced Polymers using Embedded Piezoresistive Nanocomposites,” Journal of Materials Science (0022-2461), Springer, 45(24): 6786-6798. DOI: 10.1007/s10853-010-4775-y
  2. K. Wille and K. J. Loh, 2010, “Nano-Engineering Ultra-High Performance Concrete with Multi-Walled Carbon Nanotubes,” Transportation Research Record: Journal of the Transportation Research Board (0361-1981), National Research Council, 2142: 119-126.
2009:
  1. K. J. Loh, T-C. Hou, J. P. Lynch, and N. A. Kotov, 2009, “Carbon Nanotube Sensing Skins for Spatial Strain and Impact Damage Identification,” Journal of Nondestructive Evaluation (0195-9298), Springer, 28(1): 9-25. DOI: 10.1007/s10921-009-0043-y
2008:
  1. K. J. Loh, J. P. Lynch, and N. A. Kotov, 2008, “Passive Wireless Sensing Using Multifunctional Carbon Nanotube Composite Thin Film Patches,” International Journal of Applied Electromagnetics and Mechanics (1383-5416), IOS Press, 28(1-2): 87-94.
  2. K. J. Loh, J. P. Lynch, and N. A. Kotov, 2008, “Inductively Coupled Nanocomposite Wireless Strain and pH Sensors,” Smart Structures and Systems (1738-1584), Techno-Press, 4(5): 531-548.
  3. K. J. Loh, J. P. Lynch, B. S. Shim, and N. A. Kotov, 2008, “Tailoring Piezoresistive Sensitivity of Multilayer Carbon Nanotube Composite Sensors,” Journal of Intelligent Material Systems and Structures (1045-389X), Sage, 19(7): 747-764. DOI: 10.1177/1045389X07079872
2007:
  1. T-C. Hou, K. J. Loh, and J. P. Lynch, 2007, “Spatial Conductivity Mapping of Carbon Nanotube Composite Thin Films by Electrical Impedance Tomography for Sensing Applications,” Nanotechnology (0957-4484), IOP, 18(31): 315501/1-9. DOI: 10.1088/0957-4484/18/31/315501
  2. K. J. Loh, J. Kim, J. P. Lynch, N. W. S. Kam, and N. A. Kotov, 2007, “Multifunctional Layer-by-Layer Carbon Nanotube-Polyelectrolyte Thin Films for Strain and Corrosion Sensing,” Smart Materials and Structures (0964-1726), IOP, 16(2): 429-438. DOI: 10.1088/0964-1726/16/2/022
2006:
  1. J. P. Lynch, Y. Wang, K. J. Loh, J-H. Yi, and C-B. Yun, 2006, “Performance Monitoring of the Geumdang Bridge using a Dense Network of High-Resolution Wireless Sensors,” Smart Materials and Structures (0964-1726), IOP, 15(6): 1561-1575. DOI: 10.1088/0964-1726/15/6/008
  2. J. P. Lynch and K. J. Loh, 2006, “A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring,” Shock and Vibration Digest (1070-9622), Sage, 38(2): 91-128. DOI: 10.1177/058310240606149



UCSD SE